Request information

FPLUS guaranteed efficiency

At Comexi we have built the best presses in recent years. The Comexi FPLUS is a reference in the compact press segment, including features comparable with the top range machines and achieving higher band width printing.

It has been created to obtain high precision presses at high speeds of up to 500 mpm, in widths up to 1520 mm and repeats of up to 1100 mm.

Share on

Technical characteristics
Type Gearless
Colours 10
Print width (mm - in) 870 / 1070 / 1270 / 1470
34.2 / 42.1 / 50 / 57.8
Minimum repeat (mm - in) 350 / 380
13.7 / 14.9
Maximum repeat (mm - in) 1100
Maximum speed (m/min) 500
Dimensions (m - ft) 17,20x7.27x6.75
The technical characteristics are likely to change according to the chosen setup.

Main benefits for you

Register and printing unit pressure setpoint
Register and printing unit pressure setpoint

Cingular Modules

Faster setpoints, less shrinkage, more benefits

The job changeovers in flexo presses generate waste in web and inks that have a significant impact in the profit and loss account. The current trend to reduce runs implies more changeovers, an increase in the total waste generated during the setpoints and a loss in machine efficiency.

At Comexi we have launched a set of solutions that adapt to the difference scenarios facing our clients. The CINGULAR MODULES offer automatic and semi-automatic features, with or without a mark, adapted to the specific requirements of our industry.



  • Automatic printer unit pressures and register system.
  • Use of trademark.
  • Average waste generated throughout the 100 m process on one side and according to the repeat.
  • Inspection system with camera.


  • Automatic printing unit pressure setpoint system.
  • Waste generated in the process between 20 and 160 m (with an average of 90 m) according to the repeat.
  • Suitable module for adding to the CReg semi-automatic register module without marks.


  • Semi-automatic register setpoint system for third party manufacturers.
  • Without specific marks.
  • Inspection system with camera.
  • The CINGULARPress2 module can be added to improve the automation.


  • Automatic system for printing unit pressures and register without dedicated marks.
  • Printing unit pressure setpoint using the 100% print view.
  • Register setpoint using the 100% print view and comparing it with the digital file (PDF) used to create the plates.
  • Average waste generated throughout the 200 m process.
  • 100% inspection system with state-of-the-art linear camera.
Inking control
Inking control

Excellence with the most efficient cleaning system

The Comexi SelfCleaning is an automatic system that manages the ink supply to the print, and cleans the ink chamber, the anilox, ink tanks and connection hoses in the circuit.

The system adapts to water-based inks and solvent-based inks.

Its high level of automation makes it possible to program different cycles (from light to intensive) to adapt solvent and time consumption to your needs. These advantages combined with the easy use thanks to the simple interface, complete a system designed according to the highest standards of efficiency.




The SelfCleaning is built into the actual machine frame. Its ergonomic arrangement provides for easy operator access and facilitates the maintenance tasks for all elements.

The system includes tanks for the solvent that connect to solvent recovery equipment, achieving safe and fully automatic operation.



It includes built-in online viscometers to automatically regulate the viscosity in the values set up as optimum for printing. An upgrade of the standard version also includes a temperature regulating system in order to maintain the ink working temperature.

The new electronic control allows continuous control over the working and performance of the various valves, saving large amounts of ink and reducing costs.



Visualising the system parameters via the PLC allows you to control the process from start to finish. The impulse and time screens provide preventive maintenance, minimising the machine stops as well as achieving the system's best setpoint.



The pneumatic pumps controlled by the PLC manage the ink induction and suction, at the same time as adapting the frequency to the print needs prolongs the life of the membranes.


The design of the Comexi FPlus printing unit is reinforced with respect to its siblings in the range, since it has larger diameter bearing supports, and large diameter bearings. It is fitted with a series of carbon fibre shafts both in the PC and in the AX. The PC ones are hydraulic for using hydraulic intermediate carbon fibre sleeves.

The combination of these supports and shafts in carbon fibre offers greater robustness against the impacts inherent in flexographic printing, and makes it possible to obtain a high quality print at a greater speed.

Easy access to the printing units

The Comexi FPlus has 10 decks adapted for a front print. Its design adapts to the new easy access requirements for maintenance and daily operation thanks to the FLEXOEfficiency concept.

High perfomance doctor blades
High perfomance doctor blades

The doctor blade is assembled in a closed swinging chamber mounted on linear guides. This moves horizontally automatically by means of low friction pneumatic pistons.

It is dismantled easily without having to disconnect the inking tubes, facilitating the cleaning and changeover tasks, with simple handling thanks to its extraordinary 12 kg weight.

Thanks to the patented ComexiMAGNETBlade technology, a tool-free magnetic changeover system, we can obtain a fast and safe blade and seal changeover.

Agile sleeve Changeover

The plate cylinder and anilox sleeve changeover takes a couple of minutes. The covers are opened manually, in a quick, simple way.

Due to the size and dimensions of the sleeves for the large formats, it is equipped optionally with an access platform to the printing units to facilitate sleeve changeovers. This occupies the front part of the machine and allows two carts loaded with sleeves to be arranged do that two operators can be working simultaneously in the sleeve changeover in the top printer units, as if they were on ground level, without the need for ladders and without having to make a great effort to handle the sleeves.

Drying: Power anda accessibility
Drying: Power anda accessibility

The drying equipment is made up of two fully independent circuits which, via two blowers, blow hot air at high speed, evaporating the solvent or water contained in the ink.

The first circuit is used to dry between printing units. The screen can be removed freely from the machine, and the housing includes an inspection door, ensuring comfortable and easy maintenance.

The second corresponds to the drying tunnel, which is 5 m long. It is made up of sixteen drying boxes each one with a blower nozzle, with tubes arranged to optimise heat loss. The screens can be dismantled easily and do not need tools for cleaning. The tunnel includes an specific opening for maintenance and cleaning.

Easy working on the platform

The  ComexiFPlus is fitted with a top platform which provides access to all the elements requiring maintenance.

Easy maintenance

The Comexi FPLUS has adopted maintenance improvements that have been developed for our clients' strictest needs.

Electronics and perfectly adapted interfaces

The  Comexi FPlus press is designed so that most of the functions can be controlled from the control console. In parallel our COMPACT concept, based on the SIMOTION platform and in decentralising the electronics, provides for high electronic integration, thereby eliminating electronic equipment containers and facilitating maintenance tasks.

At Comexi we apply the DDDrive concept for driving the shafts via AC motors without any kind of mechanical transmission, controlled by absolute encoders coupled directly to the shafts. All improving the register and, consequently, the quality of the print.

You will obtain production data for subsequent analysis such as the amount of meters printed, the amount of meters lost, the job duration time, stop times, print times, average real speed, etc. 

With the operator attributing the cause of the stop, statistics are obtained on the various causes of stops and the time assigned to each one. All the data can be stored in the computer memory and/or in external data storage devices.

Work files can be created to increase the efficiency in the job changeovers, and these files can be recovered subsequently.


Energy efficiency

The ENERGYSavvy concept, applied to a set of electrical and electronic control technologies, saves large amounts of energy and drastically reduces CO2 emissions.


We also recommend

Product family
Type Gearless
Colours 10 10 / 8
Print width (in) 34.2 / 42.1 / 50 / 57.8 50 / 57.8 / 65.7
Maximum repeat (in) 43.3 53.1
Speed (ft/min) 1640.4 1968

Find your contact

Comexi icon

Newsletter subscription. Subscribe to our newsletter to get important news

ISO 9001 ISO 14001 ISO 45001 UNE 166002 Emas Orgalime EPD